Mercurial > hg-public > Marlin / file diff

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Configuration_mendel.h	Fri Nov 17 10:13:31 2017 +0100
@@ -0,0 +1,30 @@
+// Extruder thermistor: RS 198-961 100k ohm 10% DO-35 NTC thermistor - All Mendels before 1/4/13
+#define E_BETA 3960.0
+#define E_NTC 100000.0
+
+// Bed thermistor: RS 484-0149; EPCOS B57550G103J - All Mendels before 1/4/13
+#define BED_BETA 3480.0
+#define BED_NTC 10000.0
+
+
+#define AXES_MAX_LENGTHS {210, 210, 140}
+#define INVERT_X_DIR false    // for Mendel set to false, for Orca set to true
+//#define INVERT_Y_DIR true    // for Mendel set to true, for Orca set to false
+#define INVERT_Y_DIR false    // for Mendel set to true, for Orca set to false
+#define INVERT_Z_DIR false     // for Mendel set to false, for Orca set to true
+#define INVERT_E0_DIR true   // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E1_DIR true    // for direct drive extruder v9 set to true, for geared extruder set to false
+#define INVERT_E2_DIR true   // for direct drive extruder v9 set to true, for geared extruder set to false
+
+#define X_MAX_LENGTH 210  
+#define Y_MAX_LENGTH 210
+#define Z_MAX_LENGTH 110
+#define HOMING_FEEDRATE {10*60, 10*60, 1*60, 0}  // set the homing speeds (mm/min)
+#define FAST_HOME_FEEDRATE {50*60, 50*60, 1*60, 0}  // set the homing speeds (mm/min)
+#define DEFAULT_MAX_FEEDRATE  {500, 500, 3, 45}
+#define DEFAULT_MAX_FEEDRATE          {300, 300, 3, 45}    // (mm/sec)    
+#define DEFAULT_MAX_ACCELERATION      {800,800,30,250}    // X, Y, Z, E maximum start speed for accelerated moves. E default values
+
+// X, Y, Z, E steps per mm
+
+#define DEFAULT_AXIS_STEPS_PER_UNIT    {80, 91.4286, 4000, 950.0} // <- 14 tooth T2.5 belt + original extruder drive