comparison: sanguino/firmwares/arduino-usbdfu/readme.txt
sanguino/firmwares/arduino-usbdfu/readme.txt
- changeset 2
- b373b0288715
equal
deleted
inserted
replaced
| 1:b584642d4f58 | 2:b373b0288715 |
|---|---|
| 1 To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader: | |
| 2 1. unpack the source into LUFA's Bootloader directory | |
| 3 2. set ARDUINO_MODEL_PID in the makefile as appropriate | |
| 4 3. do "make clean; make; make program" | |
| 5 | |
| 6 Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU". Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory) | |
| 7 |
