comparison: Configuration_neosoft_mendel.h
Configuration_neosoft_mendel.h
- changeset 3
- 770b218a4931
equal
deleted
inserted
replaced
| 2:b373b0288715 | 3:770b218a4931 |
|---|---|
| 1 // Extruder thermistor: RS 198-961 100k ohm 10% DO-35 NTC thermistor - All Mendels before 1/4/13 | |
| 2 //#define E_BETA 3960.0 | |
| 3 //#define E_NTC 100000.0 | |
| 4 | |
| 5 // Bed thermistor: RS 484-0149; EPCOS B57550G103J - All Mendels before 1/4/13 | |
| 6 //#define BED_BETA 3480.0 | |
| 7 //#define BED_NTC 10000.0 | |
| 8 | |
| 9 // Bed thermistor: Rapid 61-0446 ; Semitec 103GT-2 - All Mendel2 shipped after 1/4/13 (launch) | |
| 10 // #define BED_BETA 4126.0 | |
| 11 // #define BED_NTC 10000.0 | |
| 12 | |
| 13 // Bed thermistor: Farnell 1299930 ; EPCOS B57863S103F040 - All Mendel2 shipped after 29/5/14 | |
| 14 //*** #define BED_BETA 3988.0 | |
| 15 //*** #define BED_NTC 10000.0 | |
| 16 | |
| 17 // Extruder thermistor: RS 198-961 100k ohm 10% DO-35 NTC thermistor - All Mendel2 shipped after 1/4/13 (launch) | |
| 18 // #define E_BETA 3960.0 | |
| 19 // #define E_NTC 100000.0 | |
| 20 | |
| 21 // Extruder thermistor: Digikey 480-3137-ND - All Mendels shipped after 25/2/14 | |
| 22 //*** #define E_BETA 4138.0 | |
| 23 //*** #define E_NTC 100000.0 | |
| 24 | |
| 25 #define BED_BETA 4200.0 | |
| 26 #define BED_NTC 10000.0 | |
| 27 #define E_BETA 4200.0 | |
| 28 #define E_NTC 100000.0 | |
| 29 | |
| 30 #define AXES_MAX_LENGTHS {250, 200, 110} | |
| 31 #define X_MAX_LENGTH 250 | |
| 32 #define Y_MAX_LENGTH 200 | |
| 33 #define Z_MAX_LENGTH 110 | |
| 34 | |
| 35 #define INVERT_X_DIR true // for Mendel set to false, for Orca set to true | |
| 36 #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false | |
| 37 #define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true | |
| 38 #define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false | |
| 39 #define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false | |
| 40 #define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false | |
| 41 | |
| 42 #define HOMING_FEEDRATE {15*60, 15*60, 3*60, 0} // set the homing speeds (mm/min) | |
| 43 #define FAST_HOME_FEEDRATE {60*60, 60*60, 6*60, 0} // set the homing speeds (mm/min) | |
| 44 | |
| 45 #define DEFAULT_MAX_FEEDRATE {200, 200, 6, 120} // (mm/sec) | |
| 46 #define DEFAULT_MAX_ACCELERATION {1000,1000,50,500} // X, Y, Z, E maximum start speed for accelerated moves. E default values | |
| 47 | |
| 48 // X, Y, Z, E steps per mm | |
| 49 // 80: 18 tooth aluminium pulley | |
| 50 // 92.635: 17 tooth printed original pulley | |
| 51 // 4000: standard M5 Z Axis | |
| 52 // 950: reprap printed extruder | |
| 53 // 475: bulldog XL extruder | |
| 54 // 2133.333:TR 5x1.5 z axis | |
| 55 | |
| 56 #define DEFAULT_AXIS_STEPS_PER_UNIT {80, 91.429, 2133.333, 475.0} // <- 18-tooth aluminium pulley |
