Configuration_adv.h

Sat, 07 Nov 2015 13:24:46 +0100

author
mbayer
date
Sat, 07 Nov 2015 13:24:46 +0100
changeset 1
b584642d4f58
parent 0
2c8ba1964db7
child 3
770b218a4931
permissions
-rw-r--r--

several modifications to support laser enable - still needs cleanup

0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
1 #ifndef CONFIGURATION_ADV_H
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
2 #define CONFIGURATION_ADV_H
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
3
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
4 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
5 //=============================Thermal Settings ============================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
6 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
7
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
8
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
9 #define BED_CHECK_INTERVAL 5000 //ms
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
10
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
11
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
12 // Wait for Cooldown
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
13 // This defines if the M109 call should not block if it is cooling down.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
14 // example: From a current temp of 220, you set M109 S200.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
15 // if CooldownNoWait is defined M109 will not wait for the cooldown to finish
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
16 #define CooldownNoWait true
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
17
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
18 //These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
19 //The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
20 #define TEMP_SENSOR_AD595_OFFSET 0.0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
21 #define TEMP_SENSOR_AD595_GAIN 1.0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
22
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
23 //This is for controlling a fan to cool down the stepper drivers
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
24 //it will turn on when any driver is enabled
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
25 //and turn off after the set amount of seconds from last driver being disabled again
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
26 //#define CONTROLLERFAN_PIN 23 //Pin used for the fan to cool controller, comment out to disable this function
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
27 #define CONTROLLERFAN_SEC 60 //How many seconds, after all motors were disabled, the fan should run
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
28
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
29 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
30 //=============================Mechanical Settings===========================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
31 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
32
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
33 // This defines the number of extruders
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
34 #ifdef REPRAPPRO_MULTIMATERIALS
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
35 #define EXTRUDERS 3
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
36 #else
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
37 #define EXTRUDERS 1
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
38 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
39
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
40 #define Z_INCREMENT .0040 //Probe Movement Increment - 1 Full step on Huxley = 1/250
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
41 #define PROBE_N 3
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
42
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
43 #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
44
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
45 //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
46
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
47 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
48 #define X_HOME_RETRACT_MM 10
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
49 #define Y_HOME_RETRACT_MM 10
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
50 #define Z_HOME_RETRACT_MM 2
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
51
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
52 #define AXIS_RELATIVE_MODES {false, false, false, false}
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
53
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
54 #define MAX_STEP_FREQUENCY 50000 // Max step frequency for Ultimaker (5000 pps / half step)
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
55
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
56 //default stepper release if idle
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
57 #define DEFAULT_STEPPER_DEACTIVE_TIME 60
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
58
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
59 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
60 #define DEFAULT_MINTRAVELFEEDRATE 0.0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
61
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
62 // minimum time in microseconds that a movement needs to take if the buffer is emptied. Increase this number if you see blobs while printing high speed & high detail. It will slowdown on the detailed stuff.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
63 #define DEFAULT_MINSEGMENTTIME 20000 // Obsolete delete this
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
64
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
65 // If defined the movements slow down when the look ahead buffer is only half full
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
66 #define SLOWDOWN
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
67
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
68 // Frequency limit
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
69 // See nophead's blog for more info
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
70 // Not working O
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
71 //#define XY_FREQUENCY_LIMIT 15
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
72
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
73 // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
74 // of the buffer and all stops. This should not be much greater than zero and should only be changed
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
75 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
76 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
77
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
78 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
79 //=============================Additional Features===========================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
80 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
81
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
82
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
83 #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
84 #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // no z because of layer shift.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
85
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
86
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
87 // extruder advance constant (s2/mm3)
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
88 //
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
89 // advance (steps) = STEPS_PER_CUBIC_MM_E * EXTUDER_ADVANCE_K * cubic mm per second ^ 2
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
90 //
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
91 // hooke's law says: force = k * distance
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
92 // bernoulli's priniciple says: v ^ 2 / 2 + g . h + pressure / density = constant
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
93 // so: v ^ 2 is proportional to number of steps we advance the extruder
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
94 //#define ADVANCE
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
95
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
96 #ifdef ADVANCE
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
97 #define EXTRUDER_ADVANCE_K 0.015
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
98
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
99 #define D_FILAMENT 1.75
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
100 #define STEPS_MM_E 836
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
101 #define EXTRUTION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159)
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
102 #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUTION_AREA)
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
103
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
104 #endif // ADVANCE
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
105
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
106 // Arc interpretation settings:
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
107 #define MM_PER_ARC_SEGMENT 1
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
108 #define N_ARC_CORRECTION 25
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
109
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
110 const int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
111
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
112 // If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
113 // You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
114 // in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
115 // be commented out otherwise
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
116 //#define SDCARDDETECTINVERTED
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
117
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
118 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
119 //=============================Buffers ============================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
120 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
121
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
122 // The number of linear motions that can be in the plan at any give time.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
123 // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ringbuffering.
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
124 #if defined SDSUPPORT
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
125 #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
126 // Chuck size for fast sd transfer
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
127 #define SD_FAST_XFER_CHUNK_SIZE 1024
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
128 #else
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
129 #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
130 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
131
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
132
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
133 //The ASCII buffer for recieving from the serial:
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
134 #define MAX_CMD_SIZE 96
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
135 #define BUFSIZE 4
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
136
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
137 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
138 //============================= Define Defines ============================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
139 //===========================================================================
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
140 /*
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
141 #if TEMP_SENSOR_0 > 0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
142 #define THERMISTORHEATER_0 TEMP_SENSOR_0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
143 #define HEATER_0_USES_THERMISTOR
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
144 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
145 #if TEMP_SENSOR_1 > 0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
146 #define THERMISTORHEATER_1 TEMP_SENSOR_1
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
147 #define HEATER_1_USES_THERMISTOR
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
148 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
149 #if TEMP_SENSOR_2 > 0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
150 #define THERMISTORHEATER_2 TEMP_SENSOR_2
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
151 #define HEATER_2_USES_THERMISTOR
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
152 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
153 #if TEMP_SENSOR_BED > 0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
154 #define THERMISTORBED TEMP_SENSOR_BED
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
155 #define BED_USES_THERMISTOR
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
156 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
157 #if TEMP_SENSOR_0 == -1
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
158 #define HEATER_0_USES_AD595
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
159 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
160 #if TEMP_SENSOR_1 == -1
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
161 #define HEATER_1_USES_AD595
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
162 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
163 #if TEMP_SENSOR_2 == -1
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
164 #define HEATER_2_USES_AD595
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
165 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
166 #if TEMP_SENSOR_BED == -1
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
167 #define BED_USES_AD595
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
168 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
169 #if TEMP_SENSOR_0 == -2
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
170 #define HEATER_0_USES_MAX6675
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
171 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
172 #if TEMP_SENSOR_0 == 0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
173 #undef HEATER_0_MINTEMP
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
174 #undef HEATER_0_MAXTEMP
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
175 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
176 #if TEMP_SENSOR_1 == 0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
177 #undef HEATER_1_MINTEMP
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
178 #undef HEATER_1_MAXTEMP
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
179 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
180 #if TEMP_SENSOR_2 == 0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
181 #undef HEATER_2_MINTEMP
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
182 #undef HEATER_2_MAXTEMP
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
183 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
184 #if TEMP_SENSOR_BED == 0
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
185 #undef BED_MINTEMP
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
186 #undef BED_MAXTEMP
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
187 #endif
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
188 */
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
189
2c8ba1964db7 Initial code from reprappro Marlin repository
mbayer
parents:
diff changeset
190 #endif //__CONFIGURATION_ADV_H

mercurial